Hearth & Hand placemat pillow DIY

New year, full of new possibilities! I'm determined to make 2018 the year to decorate on a budget and today was a great start!
I LOVE these placemats by Hearth & Hand Magnolia at Target, they are only $3.99 so picked up a few and decided I'd try and make them into a pillow. I think it turned out SO perfect! Below you'll find out I did it and what I used. 

Enjoy friends!

 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

What you'll need:

-Hearth & Hand Placemat (any one will do!)

-Seam cutter or little pair of scissors

-Pillow Stuffing from your local craft store (mine was from Hobby Lobby and used a 40% off coupon)

-Needle and thread

 How To:

First, I used a tiny pair of embroidery scissors to snip away the thread holding the two halves of the placemat together.

  

Once I'd opened the placemat enough to get my hand in I stopped, probably about 5 inches across.

Then I started stuffing the placemat with the pillow stuffing.

 

Once I got the placemat stuffed to my liking (I used about 3/4ths of a bag) I took my needle and black thread and just sewed back along where I had just taken out. I tried to follow where they had sewed but really you can't even tell, it does not have to be perfect!!

I fluffed the pillow out a bit once it was all sew up and it turned out perfectly! This entire project cost me about $6!! I'm so happy with how it turned out!

 XOXO- Carolyn @thewindinghollow

Elf on the Shelf door DIY

 My kids LOVE when our elves come and visit on December 1st. Every year I try to have them bring something different, this year is this cute Elf door! I have seen these circulating Pinterest so I headed to my favorite store, Hobby Lobby to see what I could find! I was able to get everything I need just from there! 

Here's a shopping list:
-Miniature door ($10.99 but I used the 40% off coupon)
-Miniature door knob (this comes with 2 door knobs and 2 keys $3.99)
-Wreath or thin garland to make a wreath out of (see picture)
-ribbon of your choice for bow 
-snow flocking spray (optional)
-Mini Christmas tree lights
-1 Popsicle stick (for elf entry sign)
-white acrylic paint
 -red acrylic paint
-hot glue gun
-a piece of black felt or paper

  How to make-

First, I painted! The trim white and the door red.

While that was drying a I made my wreath. I used this garland pictured below, made it into a circle and went around a few times to make it look a little fuller. I really like the "flocked" look this year so I had some snow spray on hand that I used to give it that winter look!

I then made the elf entry sign by painting the Popsicle stick white and writing on it with a sharpie.

Now the paint is dry we put everything together! I hot glued the same garland around the edge of the door and added lights on top. 

I then hot glued the bow to the wreath and the wreath to the door.

I hot glued a piece of black felt to the back of the window so it looked like it was a door leading to somewhere ;)

Finish by adding your Elf Entry sign, hot glue on your door knob and your done!

How easy is that?! It took me about 1 hour, waiting for everything to dry was the longest part. 

To attach to the wall I used the sticky strips that come with the command hooks. 

I hope you enjoyed this tutorial and make your own little door!

 XOXO- Carolyn

DIY Farmhouse Tray

LOVING this DIY! I've seen these cute farmhouse trays circulating Instagram and wanted to find a way I could make it myself. I headed to hobby lobby and found some cute legs for my tray but they were small and kind of thin, if that makes sense :)  I decided to look around at other stores so I headed to Lowes. That's where I found what turned out to be PERFECT legs for my tray! This was probably the easiest DIY I have done!!

Here's what you'll need:
(2) bags of large craft finials (I found these by the corbels they sell there)
1 piece of wood, any size and thickness will do
stain of your choice
wood glue




Directions-
I distressed my wood a little...well my son did haha I let him take a small hammer and beat it up :)
The craft finials will have a screw coming out of the bottom, I just used some pliers and unscrewed it. It came out super easy.
Once you've done that you'll put some wood glue on the bottom of your finials and put them on all four corners of your wood. Let this dry for awhile, I did over night just to make sure it was secure.
(You'll notice we haven't stained yet...its SO much easier to stain your finials when they are glued to your wood then when they aren't...trust me ;))
Last step is to stain your wood! I, again let my littles do this because I didn't want it to be "perfect".

This is such an easy but cute little tray! I love mine and I hope you do too!

Enjoy Friends!

Framed Shiplap

Two words... FRAMED SHIPLAP!! This is probably my favorite DIY to date...actually, no it IS my favorite DIY! I just couldn't commit to doing an entire wall shiplap, I know I'd love it but its just so..permanent! So I headed to hobby lobby to see what I could do to make this happen. I went to the clearance section because they always have frames deeply marked down. I found a frame and had sticker shock at the price it used to be and now was...$175.50 down to $17.50!?!? That is crazy!! After I came down from my shock, I decided it would be perfect and 

now here we are! I just love it!

Supplies-

Frame (any kind, you can paint anything :)

Paint (I used chalk paint)
Paintbrush
Plywood
White paint
Wood glue
Words you want to use
Black Acrylic Paint

Directions-
If needed, paint your frame. This chalkpaint was pretty thin and chipped easily so I had to do a few coats. I then took the frame to Lowes with me to figure out what kind of ship lap I needed. I would suggest not painting the frame first if your going to take the frame to Lowes with you....you can only imagine the chips I had when I got home!!

The boards I purchased were "craft boards" and were a little pricey. The cutting saw they have at Lowes was broken otherwise I would of had them cut plywood into strips.

I painted the boards with flat white latex paint, its just what I had left over from other projects

Once they were dry I started with the words. I printed my words out and just cut them down. I placed them where I wanted them, I then  traced the letters with a pencil pressing hard so it left an indention in the wood. Then I just ran my pencil over the indention's so I could see where to paint.

I used regular black acrylic paint and a thin paint brush to "color" in my letters. This is not going to be perfect, nor is it easy but it looks great once your done.

After all that dried I started placing the boards onto the frame. It was tricky trying to space them out but once I got them where I wanted, I lifted one board up at a time and started to glue them down.

The glue HAS to dry over night, I tried to pick it up 45 mins later and my boards all slide down so make sure you let it dry!

I hope this tutorial was helpful! Please follow me on instagram and tag me in your pictures! @thewindinghollow

Walmart Windmill & Wreath

Walmart...oh Walmart...not a favorite place of mine BUT they do have some steals every now and then. This windmill sucked me in!! Another amazing Instagramer posted about changing the windmill up a bit to make it more rustic and I feel in love! It wasn't as big as I had thought but it ended up fitting PERFECTLY on my chalkboard! 

I also made a small wreath to place in the middle of the windmill, this just dresses it up a bit and gives it some character :)

Supplies for Windmill-
Windmill from Walmart $9.95
Copper acrylic paint (hobby lobby but I think they have this at Walmart)
paint brush (see picture)

Supplies for wreath-
small stick wreath (hobby lobby)
greenery (hobby lobby)
string if needed

Directions-
Take your paint and do a stippling motion on the sides of the windmill. I dabbed the extra paint off on a napkin before I started on the windmill that way it wasn't overly copper and obvious. You want this to be random, not too uniform and definitely not perfect!!
I just did one blade at a time, stopping every so often and standing back to make sure I wasn't doing the same thing to each blade.
As it dried I went over it with another clean paint brush just to get any excess off

For the wreath-
Start by cutting your greenery into long strips. I then just stuck an end into the sticks and curved it around then stuck the end in. I did this all the way around..I didn't use any string to hold the greenery on there but it may be easier if you do.

I hope you enjoy this tutorial!! 

Mason Jar Tutorial

Mason jars are such an inexpensive way to decorate and there is so many things you can do with them! I needed something for a centerpiece on my mantle so I went to Hobby Lobby in hopes of some inspiration. I'm so happy with how these turned out, fits my farmhouse style but could also be used in any home decor style.

Shopping list-
3 large mason jars
off white acrylic paint
thick rope trim (its with the ribbon at hobby lobby)
flowers of your choice ( the flowers I got came in a big bundle, $24.99 but they were 50% off this week)
Any other accent floral (I got some easter looking floral accents, also on sale)
sandpaper
paintbrush

Directions-
1. Paint your mason jars, I did two coats of regular acrylic paint. You could use chalk paint but its more expensive and they are just sitting on my mantle so the paint doesn't need to be durable.
2. Once dry completely, get your sandpaper and rough it up! I just went over the writing and did a few places on the front to give it that worn look.
3.Next I wrapped my trim around the top twice and tied a knot.
4.Then I cut my flowers and Easter accents up and stick them in the way I wanted them
5. ENJOY! :)

I hope your able to make these yourself and enjoy like I am! Please comment below with any questions and don't forget to follow me on Instagram @thewindinghollow 

-XOXO Carolyn

DIY Bakery Sign

Do this project on a day you have ALOT of patience!! I LOVE the Magnolia inspired bakery signs but of course I always think to myself "Oh, I can do that cheaper..." Well this was no different, it was cheap but not easy!! 

Supplies-
Wood (mine is pine 48X9 1/2 its just what I had you could use any size!)
Stain (I used jacobean)
white paint
BAKERY letters (modern no 20 at a 700 font size)
pencil
Black acrylic paint
small paint brush
sanding block

Directions-
1. stain your wood, I used the dark stain so when I sanded off the white paint it showed the dark underneath. Make sure you let this stain dry...like for a day before you paint.
2. paint over your stain with white paint, let dry..completely!! 
3. cut out your letters completely, I found this way works the best. I did try another way of just tracing the letters and making an indention in the wood but that makes it harder to paint.
4. place your letters onto the wood making sure its all spaced out evenly and centered. I used some painters tape on the back to hold the letters into place.
5. Trace the letters around the edge, then take off the letters and your left with some coloring to do :)
6. using a small, fine paintbrush fill in all the letters black...this is where it gets hard but be patient because it looks fine once your done!
7. let the black paint dry completely then sand all over...even on the letters you just spent so much time painting!! I promise it'll look better once you've roughed it up a bit! 
8.Enjoy your new BAKERY sign! 

Hopefully you have more patience then me with this project :) 

ENJOY!!!